<<•((``·.¸¸.·``·~» ONE STOP UPGRADES FOR THE MONGOOSE I & II «~·``·.¸¸.·``))•>>
NOTE: Some Upgrades don't work in the Mongoose BBS

Diablo Mongoose I & II History Provided by :[NA]WARLORD
The Mongoose is a M3 Black Dragun copy ( it was originally designed by Twisted Paintball, as the M3 BD Factory gun, only 13 ever made, but Twisted and M3 had a fall out, therefore, Twisted went to Gino @ NPS, sold the rights of manufacture to him, then released it under the Diablo name ) it uses the old M92 frame, the same frame the old Black Draguns used

-----------------------------------------------------------------------------------------------------------------
Mongoose I & II Factory Part's

Mongoose/ Mongoose LCD/ Reincarnation schematics Mongoose/ Mongoose LCD/ Reincarnation schematics

Mongoose I & II Genral tech help(by paintballolutions) Mongoose I & II General Tech Help (by paintballsolutions)

Dip Switch Settings
Dip Switch Setting's

FAQ's

Q: Can you use any other feednecks on the Mongoose?
A: Yes, IF you have a threaded feedneck you can use Angel feednecks. Link (Confirmed by: weeeethoma)

Q.What is the barrel thread type?
A. It has Spyder threading.

Q. How do you adjust the trigger?
A. Link

Q. Can I lower or higher the Operating Pressure?
A. Yes ~~>Link

Q. Should I oil my Delrin Bolt.
A. No never oil you Derlin Bolt it will swell and will cause problems only the O-Ring(s) an use very little like a drop or less...

Contact Diablo Chris V.
-----------------------------------------------------------------------------------------------------------------
-The Zip Kit
"The Zip Kit is an upgrade kit that will convert a standard stacked tube blow-back marker into an electro pneumatic air ram marker.

The Zip Kit will upgrade slim striker bodied Spyders, Spyder clones, etc "

This kit will fit the Mongoose just fine, plus it replaces all the internals, as well as the front block, regulator and the grip frame. It works on all the Clones. Dragun originally designed it as the "ONE" kit, but since they are no longer around, someone else redesigned and re-released it. It's also compatible with the T-1/ T Board.
Link(Confirmed by [NA]WARLORD)

- Frame grips
-------------------------
Dye Sticky 3's
(Only works for LED models & Will need a little modifying around the solenoid)

Esp Grip Frame

-Triggers
-------------------------
Check It Sweet Spot Trigger
(Will need a little modifying)

Shocktech Trigger

Trigger Frames
-------------------------
Spyder Rocking Trigger Frame (Confirmed by Wickdchyld)
(Will need minimal modifying)

Rock'N Grip Frame

-Trigger Board
-------------------------
T-Board

-Ball Detent
-------------------------
Cocker Ball Detent's

-Springs Kit's
-------------------------
32° Degrees Spring Kit

Madman Spring Kit for Spyder

Shocktech Spring Kit

-Bolts
-------------------------
Shocktech Super Fly Long Rear Cocking (Confirmed by honaker91)

Shocktech super fly top cocking boltShocktech Super Fly Top Cocking Bolt (Confirmed by Wickdchyld)

JAM Enterprise- The Intimidator Anti-Chop Bolt (Confirmed by jjdustr340) (The "no more tears" bolt)

Evil Timmy Bolt<~~ Does not work in the Mongoose BBS

-Low Pressure Valves
-------------------------
Maddman Rocket Valve Maddman Rocket Valve

32° Degrees Turbo Valve

-Switchs
-------------------------
Micro Switch
25.gm
50.gm

-Barrels
-------------------------
12" Progressive Barrel
Black Smart Parts 14" Progressive
Evil Driver Barrel
Empire Twister 16" Barrel
14" SP All American 2 piece
14" boom stick
J&J 14'' ceramic

-Vertical Adapter
-------------------------
Check It Products 15° Assault Block
(Also includes a port on the side for a gauge to display your operating pressure. Accepts all standard Low Pressure Chambers.)

Expansion Chambers
-------------------------
32° Degrees Expansion Chamber

Drop Forward
-------------------------
32° Degrees Large Drop Forward

Shocktech Drop Forward

FBM Stiletto Drop

FBM Stiletto Drop with On/Off FBM Stiletto Drop with On/Off

FBM Thorn Drop With On/Off

-Regulators
-------------------------
CP Regulator

Black Bob Long Torpedo Regulator

Evil Detonator


Palmer's Stabilizer

-Adapter
-------------------------
For The Rocking Trigger to Work with the stock Drop Forward you will need this Adapter.
-----------------------------------------------------------------------------------------------------------------
Please only post upgrades in this thread that you have done & know it work's and if you can supply a description & pictures of how you modify it.

~NOTE~Note: If i got something wrong please let me know so i can fix it

__________________
Wrath Rage - Devils Division- (((tera-notics)))

Team Xinity

Help our team By purchasing paintball gear from OrderPaintball.com